Scott Fella Tue, 04/21/2009 - 14:29
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Did you look at this link:


http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/6_0/english/deployment/guide/7921dply.pdf


Configuring the Cisco Unified Wireless IP Phone 7921G

There are two methods for configuring network settings on the Cisco Unified Wireless IP Phone 7921G:

Configuring Phones with the Keypad

You can use the menus and keypad on the phone by pressing Settings > Network Profiles. You need to unlock the screen by

pressing **#.

For more information, refer to the “Configuring Settings on the Cisco Unified Wireless IP Phone 7921G” in the

Cisco Unified Wireless IP Phone 7921G Administration Guide at this URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/prod_maintenance_guides_list.html

Configuring Phones with the Web Interface

The Cisco Unified Wireless IP Phone 7921G has an HTTPS enabled web interface that you can access via the 802.11a/b/g radio

or USB.

If you are using the USB cable connection to a PC, you must manually set a static IP on the computer side, for example,

192.168.1.X /24. By default, the Cisco Unified Wireless IP Phone 7921G USB is statically set to 192.168.1.100 /24.

You must log in to the administration web pages by using these defaults:

username is “admin” and the password is “Cisco”.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode