04-22-2009 05:12 AM - edited 07-03-2021 05:28 PM
We just setup auto RF on all of our 12 controllers. My question is, is the controller group leader the only controller
that will display the "Last Group Updates" times? or should I see it on all the controllers?
Solved! Go to Solution.
04-22-2009 05:23 AM
You should see it on all controllers. Each controller has its own timer for running the Auto RF checks.
As an aside, I highly recommend that you disable the automatic updates. Running them manually once a week or so is usually best, unless you have a constantly changing or challenging environment. Client can occasionally be disconnected by the automatic updates, which occur every 10 minutes by default.
04-22-2009 05:23 AM
You should see it on all controllers. Each controller has its own timer for running the Auto RF checks.
As an aside, I highly recommend that you disable the automatic updates. Running them manually once a week or so is usually best, unless you have a constantly changing or challenging environment. Client can occasionally be disconnected by the automatic updates, which occur every 10 minutes by default.
04-22-2009 06:08 AM
I wonder why I only see it on the lead controller? Any ideas?
11-16-2009 01:29 AM
Hello.
We have the same problem: 6 controllers running 4.2.207 and only one (controller group leader) shows actualizations. Any body knows what is the reason?
Thanks in advance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide