Employee and "hotspot" ssids

Unanswered Question
Apr 22nd, 2009
User Badges:


Trying to set up both an Employee and Hotspot ssid connection. The Hotspot is working fine. The Employee is not broadcasting SSID (by design) and will not connect from a manually configured preferred network entry. Also - Dot11Radio0 interface is working - Dot11Radio1 is in reset mode. Can someone please take a look at the attached config and to see where I'm going wrong?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gamccall Wed, 04/22/2009 - 10:46
User Badges:
  • Silver, 250 points or more

Well, one fix that jumps out at me is:

int d0

no encryption mode ciphers aes-ccm tkip

encryption vlan 2 mode ciphers aes-ccm tkip

IIRC, I believe a radio may go into reset mode if it has no clients on it. Try connecting on A (once you have G working properly) and see if that works.


This Discussion



Trending Topics - Security & Network