Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

WIC 1DSU T1 V2 error with IOS ver 12.4.23

Unanswered Question
Apr 22nd, 2009
User Badges:

I have a 3845 running 12.4.13a which I want to upgrade to 12.4.24.

After upgrade one of the interface that is configured for frame relay doesn't work anymore.

The interface configuration is:

interface Serial0/0/0

bandwidth 128

no ip address

encapsulation frame-relay

no ip mroute-cache

logging event subif-link-status

logging event dlci-status-change

no fair-queue

service-module t1 timeslots 1-4

service-module t1 remote-alarm-enable

frame-relay traffic-shaping

After the router reloads in 12.4.24 I get this errors in the log

Apr 22 13:39:33.525: %SERVICE_MODULE-4-WICNOTREADY: Unit Serial0/0/0 not ready for next command -Traceback= 0x61202820 0x60549704 0x605497B4 0x6054A458 0x605410F0 0x60547914 0x60548C58 0x60545D30 0x61243728 0x6125FA10 0x625E8D20 0x625EC350 0x6223EBC0 0x6223EBA4

Apr 22 13:39:33.525: wait_ft1_wic_mailbox failed 4

In fact is the "service-module t1 timeslots" commands that can not be executed and the router throws that error.

I tested this behaviour on two 3845s and the result is the same.

Is this a bug or is an workaround for it?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Edison Ortiz Wed, 04/22/2009 - 06:43
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member


I suggest you open a TAC case or revert back to a previous IOS version.

What triggered the IOS upgrade?



fmechetiuc Wed, 04/22/2009 - 06:49
User Badges:

Thanks for your post I will open a TAC case.


matthew_mccool Sun, 08/12/2012 - 11:00
User Badges:

Came across this discussion looking to resolve the same issue. This is an old thread but figured I would post the bug id for future users.




This Discussion