Scott Fella Thu, 04/23/2009 - 04:13
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

You can have multiple wlan ssid's use the management interface if you like or any other dynamic interface you create. If you want the wlan ssid to put users on a different vlan, then you need to configure a dynamic interface for each vlan you need. A interface on the WLC can only be tagged for one vlan and not multiple vlans.


You can configure dynamic vlan assignment to have a radius server smnp a switch and put users on a specific vlan, but you would have to use radius. If you have a guest network and are going to use a splash page, then you will have to create an interface for that.


http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml


Actions

This Discussion