04-23-2009 01:49 AM - edited 03-06-2019 05:20 AM
Hi all
can anyone give me some best practices for setting up from access to dist layers on the lan, ie things I should set up for fast convergence, stp tuning, security etc ?
04-24-2009 12:28 PM
Try this for high-level overview:
http://www.cisco.com/en/US/netsol/ns815/networking_solutions_program_home.html
And here are some best practices documents for the 4500 and 6500, though they is generic enough to apply to other platforms.
http://www.cisco.com/en/US/products/hw/switches/ps700/products_white_paper09186a00801b49a4.shtml
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080094713.shtml
Look around CCO. There are a lot of good docs out there.
-Jeff
04-28-2009 05:24 AM
Hi,
Go to www.cisco.com/go/srnd and then select Campus, Two design guides
HA recovery Analysis
Routed ACcess Design
Finally VSS design guide will there shortly.
The previous reply has good info too - but it more operational. Above design guide helps you in terms of architecture and design view point.
thx
Nimish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide