Hello!
RME 4.2.0 (from LMS 3.1) cannot upgrade IOS on Cisco 881 when SNMPv3 is configured on router. When I press "Distribute Images" in Device Center, I got:
Module Information - Not Available
Image Options - Failure
Storage Options - Failure
Errors - Failure
Software Image Management Notifications
SWIM1027: Error while fetching inventory information.
debug snmp packets (on 881 router)
Apr 23 11:48:52.788: SNMP: Packet received via UDP from x.x.x.x on Tunnel0
Apr 23 11:48:52.788: SNMP: Get request, reqid 578, errstat 0, erridx 0
ciscoMgmt.10.1.1.1.0 = NULL TYPE/VALUE
sysUpTime.0 = NULL TYPE/VALUE
Apr 23 11:48:52.796: SNMP: Response, reqid 578, errstat 0, erridx 0
ciscoMgmt.10.1.1.1.0 = NO_SUCH_OBJECT_EXCEPTION
sysUpTime.0 = 451328
Apr 23 11:48:52.804: SNMP: Packet sent via UDP to x.x.x.x
Apr 23 11:48:52.836: SNMP: Packet received via UDP from x.x.x.x on Tunnel0
Apr 23 11:48:52.836: SNMP: Get request, reqid 579, errstat 0, erridx 0
local.10.15.0 = NULL TYPE/VALUE
sysUpTime.0 = NULL TYPE/VALUE
Apr 23 11:48:52.844: SNMP: Response, reqid 579, errstat 0, erridx 0
local.10.15.0 = NO_SUCH_OBJECT_EXCEPTION
sysUpTime.0 = 451333
Apr 23 11:48:52.852: SNMP: Packet sent via UDP to x.x.x.x
I know that FlashMIB is missing on Cisco881. It looks like RME incorrectly handles responses where errstat=0, erridx=0.
Here what I see when I use SNMPv2c:
Apr 23 11:47:40.429: SNMP: Packet received via UDP from x.x.x.x on Tunnel0
Apr 23 11:47:40.429: SNMP: Get request, reqid 576, errstat 0, erridx 0
ciscoMgmt.10.1.1.1.0 = NULL TYPE/VALUE
sysUpTime.0 = NULL TYPE/VALUE
Apr 23 11:47:40.433: SNMP: Response, reqid 576, errstat 2, erridx 1
ciscoMgmt.10.1.1.1.0 = NULL TYPE/VALUE
sysUpTime.0 = NULL TYPE/VALUE
Apr 23 11:47:40.441: SNMP: Packet sent via UDP to x.x.x.x
Apr 23 11:47:40.477: SNMP: Packet received via UDP from x.x.x.x on Tunnel0
Apr 23 11:47:40.477: SNMP: Get request, reqid 577, errstat 0, erridx 0
local.10.15.0 = NULL TYPE/VALUE
sysUpTime.0 = NULL TYPE/VALUE
Apr 23 11:47:40.485: SNMP: Response, reqid 577, errstat 2, erridx 1
local.10.15.0 = NULL TYPE/VALUE
sysUpTime.0 = NULL TYPE/VALUE
Apr 23 11:47:40.489: SNMP: Packet sent via UDP to x.x.x.x
Apr 23 11:47:41.413: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success ...
As you can see, RME gets SNMP error "No Such Name" and then logs in via terminal.
Should I open TAC Case?
PS. I have LMS 3.1 for Windows.
