Access code with CCM in a centralized deployment

gmichel08 · ‎04-23-2009

Hi,

I've got a centralized deployment with CCM6 and two sites. I used two H.323 gateways and set the PSTN access code to 9. I defined my route pattern and put my gateways in a route list. My problem is that I've got most of the calls from site B routed the site A gateway. I've thought of two access codes but what if i've got 100 sites to deal with.

Please advice,

Jaime Valencia · ‎04-24-2009

this is not a Video over IP question, please use the NetPro categories appropriately

use CSS and partitions to route the calls to the right GW depending on the source of the call

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate