radius broke my IOS?

Unanswered Question

while configuring a 3560G for aaa\radius my router froze and had to be manually booted.

aaa settings are ok, didn't get any problems with this part

but when I started typing the radius commands... oh boy!

this is the first line: ip radius source-interface Vlan200

then this is the second command which broke it all:

radius-server host 192.168.200.x auth-port 1645 acct-port 1646 key 7 password


any idea what & why this command would break and how can I configure my radius without breaking the switch?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vkapoor5 Wed, 04/29/2009 - 06:13
User Badges:
  • Bronze, 100 points or more

This example shows how to enable AAA, use RADIUS authentication and enable device tracking:


Switch(config) configure terminal

Switch(config)# aaa new-model

Switch(config)# aaa authentication login default group radius

Switch(config)# aaa authorization auth-proxy default group radius

Switch(config)# radius-server host key key1

Switch(config)# radius-server attribute 8 include-in-access-req

Switch(config)# radius-server vsa send authentication

Switch(config)# ip device tracking

Switch(config) end


Actions

This Discussion