04-23-2009 01:05 PM - edited 03-06-2019 05:21 AM
All,
I have an ASA 5505 w/security plus license, a 3560 8 port switch and an 1131 AP. The ASA will have an outside static IP and a L2L tunnel back to HQ. I need two VLANs, 1 for our company data and 1 for guest traffic. I'm curious as to where I should setup the dhcp pools. Should they be on the switch or on the ASA? I do not have a server at this location so I have to use one of these devices for dhcp. Anyone have any ideas and/or config examples? Thanks in advance.
04-23-2009 01:10 PM
Is the 3560 acting as a L2 or L3 switch ie. your 2 vlans, are they being routed on the 3560 or the ASA ?
Jon
04-23-2009 01:17 PM
Is there a way to do it on both? If not, I would rather have the switch do the routing.
04-23-2009 01:36 PM
Well if your 3560 is doing the inter-vlan routing -
ip dhcp-excluded address 192.168.100.1 192.168.100.10
ip dhcp-excluded address 192.168.101.1 192.168.101.10
ip dhcp pool vlan100
network 192.168.100.0 255.255.255.0
default-router 192.168.100.1
dns-server x.x.x.x
ip dhcp pool vlan 101
network 192.168.101.0 255.255.255.0
default-router 192.168.101.1
dns-server x.x.x.x
see this link for full details -
http://www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfdhcp.html
Jon
04-24-2009 04:58 AM
Thanks for the help Jon.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: