video over wifi

Unanswered Question

I have an autonomys wireless network.

1242 AP's and Cisco 3560 PoE switchs, WLSE.

I have a new application for deaf interpriting in a hospital environment.

No special configs just differnet ssids using WPA, Leap , WEP . This is one device that is on its own ssid and vlan. Signals are excellent, but I get excess packet retrys, and the AP will disassociate the device and then reassociate. This locks up the application. Is there some configuration settings that I could use or could you point me to a information source with config examples. I have looked but cannot find what I need.

Thanks for your help

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
George Stefanick Sat, 04/25/2009 - 09:39
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, October 2015

If you are seeing a lot of packet reties you need to try and discovery why that is...

Things you need to consider:

1) Spectrum Analysis at the time you see high retry rates

2) Check firmware on both the APs and Client

3) A layer 2 analysis and see if another other clients are suffering from retries


This Discussion