VPN lab help between Pix and router

Unanswered Question
Apr 24th, 2009


I'm trying to create a VPN in my lab setup.

I have a Cisco Pix 515 and a Cisco 2621 router.

I don't have a crossover cable yet, so the outside of the firewall is plugged into a hub and the outside interface FE 0/0 on the router is plugged into the hub too.

The router can ping the outside IP of the Pix.

I must be missing something as I have added the VPN commands to the router and Pix and enabled debugging on the crypto ISAKMP but I see nothing.

The Pix LAN is

The Router LAN is

Pix Outside is

Router Outside is

Using AES-256 SHA, DH Group 5

Hopefully you can see whatthe issue is, I am almost going to eraze both configs and start again.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion