pix 6.3 config for email hosting

Unanswered Question
Apr 24th, 2009
User Badges:

Does any one have a basic config for hosting an email server with a pix 6.3


I know there would be an inbound natted public ip. But for the outbound how do i nat it to the same public ip. Do i need to create a global/nat config just for that email server?

I have a pat overload on the interface for web surfing. thanks all


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mherald Fri, 04/24/2009 - 13:19
User Badges:

You could do this one of two ways.


If you only have 1 Public Address, not really a choice, put you would PAT incoming email (port 25) to your inside host with a command such as:


static (inside,outside) tcp public-IP 25 10.10.10.10 25 netmask 255.255.255.255


Or a static command:


static (inside,outside) public-IP 10.10.10.10 netmask 255.255.255.255


Where in the second command, you are not using your outgoing PAT, jsut a different address (that you own).


Mike

Actions

This Discussion