04-24-2009 12:43 PM - edited 03-04-2019 04:30 AM
Hi *,
is there a way to use a cisco 836 at a 16 MBit ADSL from t-online ?
ROM: System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)
System image file is "flash:c836-k9o3s8y6-mz.124-17.bin"
when I connect it to the DSL the debug shows:
Feb 21 07:58:12.642: DSL: 1: Modem state = 0x8
Feb 21 07:58:13.050: DSL: Received response: 0x22
Feb 21 07:58:13.050: DSL: Open failed: The ATU-C and ATU-R are not configured fo
r a common mode of operation -- retrying
Feb 21 07:58:13.050: DSL: Modem has open failed for 5 time(s)
Feb 21 07:58:16.050: DSL: Trying to bring up DSL line using Embedded firmware ve
rsion : 4.10.1
Feb 21 07:58:16.050: DSL: Send ADSL_OPEN command.
Feb 21 07:58:16.050: DSL: Using subfunction 0xB
Feb 21 07:58:16.050: DSL: Using subfunction 0xB
Feb 21 07:58:16.050: LOCAL:Max noise margin for power cutoff 31
Feb 21 07:58:16.050: DSL: Sent command 0x3
Feb 21 07:58:18.550: DSL: 1: Modem state = 0x8
Feb 21 07:58:18.954: DSL: Received response: 0x22
Feb 21 07:58:18.954: DSL: Open failed: The ATU-C and ATU-R are not configured fo
r a common mode of operation -- retrying
Feb 21 07:58:18.954: DSL: Modem has open failed for 6 time(s)
Feb 21 07:58:21.954: DSL: Trying to bring up DSL line using Embedded firmware ve
rsion : 4.10.1
Feb 21 07:58:21.954: DSL: Send ADSL_OPEN command.
Feb 21 07:58:21.954: DSL: Using subfunction 0xB
Feb 21 07:58:21.954: DSL: Using subfunction 0xB
Feb 21 07:58:21.954: LOCAL:Max noise margin for power cutoff 31
Feb 21 07:58:21.954: DSL: Sent command 0x3
Feb 21 07:58:24.454: DSL: 1: Modem state = 0x8
Feb 21 07:58:24.858: DSL: Received response: 0x22
Feb 21 07:58:24.862: DSL: Open failed: The ATU-C and ATU-R are not configured fo
r a common mode of operation -- retrying
Feb 21 07:58:24.862: DSL: Modem has open failed for 7 time(s)
Feb 21 07:58:24.862: DSL: Connection has reached max retries, toggle to other mo
de
Feb 21 07:58:27.862: DSL: SM: [DMTDSL_DO_OPEN -> DMTDSL_INIT]
Feb 21 07:58:28.862: DSL: SM: [DMTDSL_INIT -> DMTDSL_DLOAD_1]
Feb 21 07:58:28.862: DSL: Using Firmware Embedded in IOS
Feb 21 07:58:28.862: DSL: Downloading ASW_init_4_10_1.bin
Feb 21 07:58:28.866: DSL: Downloaded 3 blocks... Finished!
Feb 21 07:58:28.866: DSL: Sent command 0x14
Feb 21 07:58:32.774: DSL: Received response: 0x80
Feb 21 07:58:32.774: DSL: SM: [DMTDSL_DLOAD_1 -> DMTDSL_DLOAD_2]
Feb 21 07:58:32.774: DSL: Downloading ASW_R4_10_1.bin
Feb 21 07:58:32.870: DSL: Downloaded 100 blocks
Feb 21 07:58:32.962: DSL: Downloaded 200 blocks
Feb 21 07:58:33.058: DSL: Downloaded 300 blocks
Feb 21 07:58:33.150: DSL: Downloaded 400 blocks
Feb 21 07:58:33.246: DSL: Downloaded 500 blocks
Feb 21 07:58:33.338: DSL: Downloaded 600 blocks
Feb 21 07:58:33.346: DSL: Downloaded 610 blocks... Finished!
Feb 21 07:58:33.346: DSL: Sent command 0x14
Feb 21 07:58:35.345: changed current state to do open!!
Feb 21 07:58:35.345: DSL: SM: [DMTDSL_DLOAD_2 -> DMTDSL_DO_OPEN]
Feb 21 07:58:35.345: DSL: Trying to bring up DSL line using Embedded firmware ve
rsion : 4.10.1
Feb 21 07:58:35.345: DSL: Send ADSL_OPEN command.
Feb 21 07:58:35.345: DSL: Using subfunction 0x11
Feb 21 07:58:35.345: DSL: Using subfunction 0x11
Feb 21 07:58:35.345: LOCAL:Max noise margin for power cutoff 31
Feb 21 07:58:35.345: DSL: Sent command 0x6
Feb 21 07:58:37.845: DSL: 1: Modem state = 0x8
Feb 21 07:58:38.257: DSL: Received response: 0x22
Feb 21 07:58:38.257: DSL: Open failed: The ATU-C and ATU-R are not configured fo
r a common mode of operation -- retrying
04-24-2009 01:00 PM
You can try ADSL FW 4.10.9 from
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: