×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

host on another Vlan

Unanswered Question
Apr 24th, 2009
User Badges:

Hi,

I have on my company two Vlan (192.168.1.0/24 and 192.168.2.0/24)but without switch layer 3 so without connection them.

Now, I need to give application Citrix installed on a host 192.168.2.8 at some client from network 192.168.1.0.

So I think to deploy an a PIX 501 and connect interface inside on 192.168.2.0 and interface outside on 192.168.1.0.

Does anybody advice me an configuration about or documentation ?


Best regards


Lorenzo

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
andrew.prince@m... Sun, 04/26/2009 - 01:50
User Badges:
  • Green, 3000 points or more

Lorenzo,


Do you have to secure the connections between the 2 vlans - are they both internal to your company?

lformelli Sun, 04/26/2009 - 09:57
User Badges:

Yes,

they are both internal in my company but different department and I need to connect application from a network with some clients in the other.


best regards


Lorenzo


andrew.prince@m... Sun, 04/26/2009 - 10:24
User Badges:
  • Green, 3000 points or more

The easiest way would be to create an SVI interface on your primary switching/routing device if you have one.


If not - a router that has interfaces in both vlans will route between the 2 is also a good solution.


Do you have a router?


Do you have a switch capable of supporting SVI's?


Actions

This Discussion