call Redundancy between two PRI ???

Unanswered Question
Apr 25th, 2009
User Badges:

hi guys,


i have CCM 6.1 Cluster and two PRI lines terminating on two different routers, and i have to configure redundancy between both PRI Lines ???? how to do that ???


is it possible to configure that one call goes to PSTN via one PRI and second call to PSTN via second PRI ????


if yes how we can configure it ????


Regards

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Sat, 04/25/2009 - 19:13
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

if MCGP configure the mgcp redundant host command

if H323 configure dial-peers with higher preference


for outgoing calls configure the route group with circular as Distribution Algorithm


HTH


java


if this helps, please rate

Ayodeji Okanlawon Sat, 04/25/2009 - 21:44
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Java,


I believe MGCP redundant host command is for CCM redundancy.


so with MGCP and H323 he has to use Route groups. As java said assign the PRI end points to the same route group and use circular algorithm. CCM will automatically load balance between them.

Actions

This Discussion