WLC526 Wireless Controller Hangs

Unanswered Question
Apr 25th, 2009
User Badges:

I have a new WLC526 installed at a site that seems to hang after about 8 hours of use. I can ping everything else on the network, except for the controller management address. I can also log in the controller via console and do everything except pass traffic across the interface. The controllers management and ap-management IP's are on the same VLAN (default 1) and the wireless users are on VLAN 10 - Usernet.

The controller is connected to a CE520 switch, and using a 1811 router for the gateway.

Any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
tstanik Thu, 04/30/2009 - 11:56
User Badges:
  • Bronze, 100 points or more

The following reasons may cause WLC hang. WLC TSEC driver may hang or crash the device. Certain packets may cause WebAuth services to hang or reload the Device.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode