04-25-2009 05:22 PM - edited 07-03-2021 05:29 PM
I have a configuration with a root bridge 340 series and about 5 non-root bridge 340 series. I want to add a 1242 non root bridge, but the new device can't see the others, and neither the others can see the 1242.
Is there an issue in connecting these two devices in this configuration?
04-27-2009 04:51 AM
Yes. Bridging to 340's is not supported in any current hardware model. Unfortunately, you'll have to replace all your old 340s in order to make any changes to that solution.
04-30-2009 02:07 AM
Hi, first, thanks for the help.
Second, this incompatibility is only valid
for RFC1042 or it is valid for 802.11g?
Third, If I configure my 1242 as Acess Point, and the 340 series as Client or Brigde_only, they should not talk too?
Sorry for the bad english...
05-03-2009 08:21 PM
The 340s are way old and is very unlikly to be supported with anything new today. Also keep in mind when doing bridges its best to keep the same bridge on either end or make sure they are support if they are different.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide