cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
899
Views
0
Helpful
5
Replies

2621 Upgrade failure

framedrelay
Level 1
Level 1

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

File reception completed.

TFTP flash copy: Error, image size (18070132) larger than flash (8388608).

rommon 14 >

Do I really need to buy/replace flash? Or I still have space in flash (after format:?), how can i check this from rommon> mode?

Please help.

Sylvester

5 Replies 5

framedrelay
Level 1
Level 1

& If I reset, it gives me the magic number error.

rommon 14 > confreg 0x2101

rommon 15 > reset

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 24576 Kbytes of main memory

device does not contain a valid magic number

boot: cannot open "flash:"

boot: cannot determine first file name on device "flash:"

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 24576 Kbytes of main memory

rommon 1 >

rommon 1 >

Note, main problem is space.!!! is there anyway to free the space in flash?or check the contents of flash from Rommon> mode - If not what is the alternative?

Cheers,

Sylvester

Leo Laohoo
Hall of Fame
Hall of Fame

Hi Sylvester,

Downgrade to an IOS which is <24mb flash requirement.

Hi,

Thanks for the reply.

Earlier I was using c2600-js-mz.120-2.XC2, Since the router had VWIC-2MFT-T1-D1 card, i had to upgrade to IP Plus IOS which is c2600-is-mz.123-26.bin

If I downgrade to previous version, I will not able to use my Module. :(

Kindly suggest,

Regards,

Sylvester

Or shall I upgrade the flash;

Leo Laohoo
Hall of Fame
Hall of Fame

I think you need to add some flash to your router.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: