Hi - When configuring static NAT, the configuration guide states that you use the format 'static (inside,dmz)' where your connections are going to be initiated from the inside to the DMZ.
Access-lists permitting, will this allow connections to be initiated from the DMZ interface to inside?
What I'm trying to work out is does it make any difference if I use 'static (inside,dmz) or 'static (dmz,inside)'?
I have a requirement for traffic to be initiated in either direction between the inside and the DMZ, can I do this with one static NAT translation or do I need 2 - one for each direction.
Many Thanks in advance