On line diagnostic

Answered Question
Apr 27th, 2009
User Badges:

Hello,


We have problems with a 3750 switch and We want to run a diagnostic test with the command "diagnostic start switch 1 test all". We are afraid about the time that the switch will be off-line because of this test.


Do you know How much time will it take for the switch to complete a test like this?


Thank you,



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_see/configuration/guide/swgold.html


That link will show some sample output with timestamps to estimate test time completion.


I just ran that command on a test 3750 with 12.2(35) IOS. It took about 3 minutes including the reboot of the switch. WS-C3750-24PS-S is the model. The switch is NOT in a stack.


Your results could vary. You could schedule a test for sometime in the future during an outage period.

cdelafuente31 Mon, 04/27/2009 - 06:50
User Badges:

Thank you Bret, I had seen this guide but from 16:43:29 to 00:00:30 seems a lot of time. I hope It's a misprint.


We have a stack of two WS-C3750-48TS, I suppose It'll spend more than 3 minutes. Anyway, thank you very much for the info.

Actions

This Discussion