04-27-2009 05:57 AM - edited 03-15-2019 05:40 PM
Hi there !
In CM 4.2 there's a FAC (Forced Authorization Code) for each user that is allowed to place external calls..
Does CME has the same feature ?
Thanks.
Andrei.
04-27-2009 06:11 AM
Hi Andrei,
You can use Call Blocking Override. Take a look at the admin guide:
Hope it helps you.
Best regards,
- Adrián.
04-27-2009 06:13 AM
no, most similar is a script
PLEASE use the SEARCH function in netpro, this has been asked many, many, many times before
IP Telephony: Dial using pin number
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40^1%40%40.2cd235cb/1#selected_message
IP Telephony: CME- How can i make outgoing PSTN calls only with a key like FAC (in cucm)
And there are many other posts on the exact same matter
HTH
java
if this helps, please rate
03-12-2010 08:53 PM
Andrei,
Try this;
application
service clid clid_authen_collect
param uid-len 4
param pin-len 4
On your dial peers add this command;
service clid_authen_collect
Vikram
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide