Integrate CUCM 6.0 with CCME

Unanswered Question
Apr 27th, 2009

We have two international locations.

At one location (location 1) we have CUCM 6.0 & at the other location (location 2)we have CCME on 2800 router.Both locations are connected via 512K international MPLS link.


We want users behind CCME to use local PSTN & when the users want to call to location 2 extensions they use the international MPLS link & visa-versa.


1.How do we integrate the CCME with CUCM.What are the required parameters that need to be configured on CCME & CCM.



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gogasca Mon, 04/27/2009 - 22:23

Hi Sack,

You can integrate it via SIP or via H323 because of the international link i would go for H.323.

You need to configure in cme dial-peers pointing to cucm and in cucm route oatterns and add an h.323 gw

if you browse our site there is some documents for this integration.

sachin_mon Mon, 04/27/2009 - 22:30

Hi Gonzalo,

Thanks for your prompt response.

Can you share some documents if you have to do the same.



This Discussion