RME device inventory on LMS 2.6

Answered Question
Apr 28th, 2009
User Badges:

I have 2 devices their config are archived on RME however RME unable to collect inventory. every inventory job has been failed. and I couldn't found any reason for the failure only I got "inventory never collected" what is the probable cause? thanks.

Correct Answer by Joe Clarke about 8 years 1 month ago

That's the problem. There is a known loop in the ENTITY-MIB in this version of IOS. You need to upgrade to 12.3(2) or higher.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joe Clarke Tue, 04/28/2009 - 09:59
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You'll need to post the IC_Server.log after running an inventory collection against these devices.

Joe Clarke Tue, 04/28/2009 - 13:41
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Are these routers running 12.3(1)?

eliaspaulos Tue, 04/28/2009 - 13:44
User Badges:


appears to be...here is sh ver. output

IOS (tm) C2600 Software (C2600-ENTBASE-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2003 by cisco Systems, Inc.


Correct Answer
Joe Clarke Tue, 04/28/2009 - 14:03
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

That's the problem. There is a known loop in the ENTITY-MIB in this version of IOS. You need to upgrade to 12.3(2) or higher.

Actions

This Discussion