VRF Aware WCCP !!!!!! PLEASE!!!!!!

Unanswered Question
sachinga.hcl Mon, 06/01/2009 - 09:55
User Badges:
  • Silver, 250 points or more

The VRF awareness for 12.4(T) is still probably 8-12 months out. VRF aware WCCP features are definitely in the pipeline, but nothing has been publically published on availability timelines.



It's now publically available on the forum... but , I've only found it on the 3750 and 3550 documentation.



at the 3750 you will need to place the redirect statement on each of the VLANs, ip wccp 61 redirect in


Kindly find here GRE Tunnel with VRF Configuration Example:


http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a00801e1294.shtml


I have gotten as far as the WAE registering the router:

"WCCP configuration for TCP Promiscuous service 61 and 62 succeeded.

WCCP configuration for TCP Promiscuous succeeded.Please remember to

configure WCCP service 61 and 62 on the corresponding router."


wae01#sh wccp router

Router Information for Service: TCP Promiscuous 61

Routers Configured and Seeing this Wide Area Engine(1)

Router Id Sent To Recv ID

0.0.0.0 209.1.1.1 0000022F

--------------------------


--------------------------

The router registers the WAE as a WCCP client:

router04#

"*Feb 4 18:56:09.892: %WCCP-5-SERVICEFOUND: Service 61 acquired on WCCP

client 209.1.1.2"

"*Feb 4 18:56:09.892: %WCCP-5-SERVICEFOUND: Service 62 acquired on WCCP

client 209.1.1.2"


The router however cannot figure out what its ID is and does not see

itself as a WCCP group router.

router04#sh ip wccp

Global WCCP information:

Router information:

Router Identifier: -not yet determined-

Protocol Version: 2.0


Service Identifier: 61

Number of Service Group Clients: 1

Number of Service Group Routers: 0

Total Packets s/w Redirected: 0

Process: 0

Fast: 0

CEF: 0

Redirect access-list: ACCELERATED-TRAFFIC

Total Packets Denied Redirect: 0

Total Packets Unassigned: 25957

Group access-list: -none-

Total Messages Denied to Group: 0

Total Authentication failures: 0

Total Bypassed Packets Received: 0

--------------------------




This is a short summary of important commands for working with VRF's.

View the VRF instances and the associated interfaces.


ml-mr-c6-gs#show ip vrf

Name Default RD Interfaces

blurvrf 100:2 Vlan215

Vlan326

tgvrf 100:1 Vlan132

Vlan325

TenGigabitEthernet1/1

ml-mr-c6-gs#


Show the routing table for a specific VRF.


ml-mr-c6-gs#show ip route vrf tgvrf


Routing Table: tgvrf

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external,

---More--


Gateway of last resort is 128.117.243.57 to network 0.0.0.0


O E2 192.52.106.0/24 [110/1] via 128.117.243.57, 1d19h, Vlan325

O E2 192.168.150.0/24 [110/160] via 128.117.243.57, 1d19h, Vlan325

172.17.0.0/29 is subnetted, 3 subnets

O E2 172.17.1.16 [110/0] via 128.117.243.57, 1d19h, Vlan325

O E2 172.17.1.8 [110/1] via 128.117.243.57, 1d19h, Vlan325

O E2 172.17.1.0 [110/1] via 128.117.243.57, 1d19h, Vlan325

--More--


Debugging should otherwise be similar to a regular switch or router.





Final Teragrid VRF Design and Diagrams



http://www.cisl.ucar.edu/nets/devices/routers/cisco/vrf/final.shtml




Teragrid Testbed Design

http://www.cisl.ucar.edu/nets/devices/routers/cisco/vrf/testbed.shtml




Cisco 4500 Series Switch Cisco IOS s/w config guide 12.1(20)EW

Configuring VRF-Lite


http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.1/20ew/configuration/guide/vrf.html




sachin garg

Actions

This Discussion