CPU utilization on a C1720 Router

Unanswered Question
Apr 28th, 2009
User Badges:

I have a C1720 router with 1 FE interface and 1 serial T1 interface. The CPU runs between 20 - 25% utilization but gets pegged at 100% at least once every minute. It usually last between 5 - 10 seconds and I am trying to pin down what is causing it.

It is running 12.3 IP BASE code and has QOS enabled on both the LAN and WAN interface.

When I use the sho proc cpu sorted command IP INPUT is at the top and by far the most active pocess. Is this the QOS or is it something else?

Any thoughts would be appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Edison Ortiz Tue, 04/28/2009 - 10:42
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Are the output drops incrementing under the serial interface?




This Discussion