Spanning Tree Problem Help

Unanswered Question
Apr 28th, 2009
User Badges:

HP3020 Swich won't Join VTP domain using dotq trunk. I am trying to connect a Blade system to the 6509 and using 4port ether channnel using LACP protocol. Redundant system so tried connecting the one switch and it works fine using the same configuration except it connects to a diffrent 6509. The ether channel came up with trunking but the switch wont join VTP to get the vlan info.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
gnijs Tue, 04/28/2009 - 12:26
User Badges:
  • Bronze, 100 points or more

- check vtp is not transparant

- check vtp password if used

- check vtp domain name is the same on both sides of the trunk

bmath Tue, 04/28/2009 - 12:44
User Badges:

Yes it's all right.


Domain

No password,

client

gnijs Wed, 04/29/2009 - 12:47
User Badges:
  • Bronze, 100 points or more

- Check if native VLAN is the same on both sides of the trunk

- Shut/no shut portchannel if any of these parameters (vtp mode, vtp password) have changed from the default.

bmath Tue, 04/28/2009 - 13:00
User Badges:

Yes it's all right.


Domain

No password,

client

Actions

This Discussion