04-28-2009 12:18 PM - edited 07-03-2021 05:30 PM
I setup an 1240 radio with the following configuration but I don't know why it is not working ⦠I'm getting a authentication error. I will appreciate your help.
Thanks.
aaa new-model
aaa group server radius rad_eap
server 192.168.10.111 auth-port 1645 acct-port 1646
â¦
â¦
aaa group server radius dummy
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
dot11 vlan-name blue vlan 100
dot11 vlan-name red vlan 200
dot11 ssid blue
vlan 100
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
â¦
â¦
username Cisco password 7 â¦â¦
â¦
â¦
interface Dot11Radio0
encryption vlan 100 mode ciphers tkip
encryption vlan 200 mode ciphers tkip
ssid blue
ssid red
station-role root
â¦
ip radius source-interface BVI1
radius-server local
no authentication eapfast
no authentication mac
nas 192.168.10.111 key 0 Cisco
user Cisco password 0 Cisco
!
radius-server attribute 32 include-in-access-req format %h
radius-server host 192.168.10.111 auth-port 1645 acct-port 1646 key 0 Cisco
radius-server vsa send accounting
â¦
â¦
wlccp ap username Cisco password 0 Cisco
wlccp wds priority 254 interface BVI1
debug output:
*Mar 1 00:24:11.155: WDS: WLCCP_TYPE_AAA (START) rcvd, Org = 0040.9653.d356, Rsp = 001d.7097.b8fa, Req 0040.9653.d356, id 1 auth 4 key 0
*Mar 1 00:24:11.156: WDS: WLCCP_TYPE_AAA (EAPOL) sent with Source IP = 192.168.10.111, Org = 001d.7097.b8fa, Rsp = 0040.9653.d356, Req 0040.9653.d356, auth 4, key 0
*Mar 1 00:24:11.156: WDS: WLCCP_TYPE_AAA (START) rcvd, Org = 0040.9653.d356, Rsp = 001d.7097.b8fa, Req 0040.9653.d356, id 1 auth 4 key 0
*Mar 1 00:24:11.157: WDS: WLCCP_TYPE_AAA (EAP Request) rcvd, Org = 0040.9653.d356, Rsp = 001d.7097.b8fa, Req 0040.9653.d356, id 2 auth 0 key 0
*Mar 1 00:24:11.157: WDS: WLCCP_TYPE_AAA (EAP Request) rcvd, Org = 0040.9653.d356, Rsp = 001d.7097.b8fa, Req 0040.9653.d356, id 2 auth 0 key 0
*Mar 1 00:24:11.157: WDS: WLCCP_TYPE_AAA (EAPOL) sent with Source IP = 192.168.10.111, Org = 001d.7097.b8fa, Rsp = 0040.9653.d356, Req 0040.9653.d356, auth 4, key 0
*Mar 1 00:24:11.161: WDS: WLCCP_TYPE_AAA (EAP Request) rcvd, Org = 0040.9653.d356, Rsp = 001d.7097.b8fa, Req 0040.9653.d356, id 3 auth 0 key 0
*Mar 1 00:24:11.161: WDS: WLCCP_TYPE_AAA (EAP Request) rcvd, Org = 0040.9653.d356, Rsp = 001d.7097.b8fa, Req 0040.9653.d356, id 3 auth 0 key 0
*Mar 1 00:24:11.162: WDS: WLCCP_TYPE_AAA (EAP Request) rcvd, Org = 0040.9653.d356, Rsp = 001d.7097.b8fa, Req 0040.9653.d356, id 4 auth 0 key 0
*Mar 1 00:24:11.162: WDS: WLCCP_TYPE_AAA (EAP Request) rcvd, Org = 0040.9653.d356, Rsp = 001d.7097.b8fa, Req 0040.9653.d356, id 4 auth 0 key 0
*Mar 1 00:24:11.163: WDS: WLCCP_TYPE_AAA (EAPOL) sent with Source IP = 192.168.10.111, Org = 001d.7097.b8fa, Rsp = 0040.9653.d356, Req 0040.9653.d356, auth 4, key 0
*Mar 1 00:24:11.163: WDS: DOT11_AAA_FAILURE ...
*Mar 1 00:24:11.163: WDS: WLCCP_TYPE_AAA (FINISH) sent with Source IP = 192.168.10.111, Org = 001d.7097.b8fa, Rsp = 0040.9653.d356, Req 0040.9653.d356, auth 4, key 0
*Mar 1 00:24:11.164: WDS: DOT11_AAA_FAILURE ...
*Mar 1 00:31:47.953: dot11_auth_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_FAIL) for 001d.7097.b8fa
*Mar 1 00:31:47.954: dot11_auth_dot1x_send_response_to_client: Forwarding server message to client 001d.7097.b8fa
*Mar 1 00:31:47.954: EAPOL pak dump tx
*Mar 1 00:31:47.954: EAPOL Version: 0x1 type: 0x0 length: 0x0004
04-28-2009 01:39 PM
What errors if any show up in the radius server logs?
04-28-2009 01:47 PM
The radius is local. the ap is the radius server.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: