04-29-2009 03:33 AM - edited 03-11-2019 08:25 AM
Hi,
I am using ASA 5520.Is it possible for me to terminate 2 or more than that isp on and run it as load share and failover?Failover can be worked out with two isp..I want to use it as load hsare and aggregation too.If not is there any alternate solution or product this?
Reg,
Sushil
04-29-2009 05:50 AM
You really should routers for this.
04-30-2009 12:26 AM
How this has to be done.any link or url for the same would be appriciated.Here to differnet isp would be terminating the link on separate routers.A third link is coming as broadband connection.
Till now there was only one link from one ISP.terminted on router and that in turn attached with one of the int of asa,natted.How should be design if more isp comming.
Reg,
Sushil
04-30-2009 05:27 AM
Will you be running BGP or just getting default routes from each provider?
05-01-2009 03:07 AM
Will be on defualt routes.
05-01-2009 06:01 AM
Simple load balance-
ip route 0.0.0.0 0.0.0.0 ISP_A
ip route 0.0.0.0 0.0.0.0 ISP_B
ip route 0.0.0.0 0.0.0.0 ISP_C
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide