Point to point configuration between PRI and BRI

sunishnair · ‎04-29-2009

Hi,

We have one requirement from our customer side.

They want to make Video conference between Two Locations With The help of Cisco CCM and Presence. One side Customer Ready to give Pri Link (E1), other side they are offering 3 ISDN (BRI) Link, I would like to know that whether this scenario is work around able or if it's possible please share your valuable feed back on this case

if any kind of document available or not

NB: our main concern is Video will work or not with this scenario.

Regards,

Sunish

Nicholas Matthews · ‎04-30-2009

Hi Sunish,

This is supported, and is fairly common.

Here's an older document that may be worth looking at:

http://www.cisco.com/en/US/docs/ios/12_1t/12_1t2/feature/guide/dt_qsig.html

hth,

nick

paolo bevilacqua · ‎05-02-2009

Hi, you had asked this already, it is a cumbersome configuration and you should get a broadband/VPN solution instead.