Point to point configuration between PRI and BRI

Unanswered Question
Apr 29th, 2009
User Badges:

Hi,


We have one requirement from our customer side.


They want to make Video conference between Two Locations With The help of Cisco CCM and Presence. One side Customer Ready to give Pri Link (E1), other side they are offering 3 ISDN (BRI) Link, I would like to know that whether this scenario is work around able or if it's possible please share your valuable feed back on this case


if any kind of document available or not


NB: our main concern is Video will work or not with this scenario.



Regards,

Sunish


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Laurent Aubert Wed, 04/29/2009 - 16:36
User Badges:
  • Cisco Employee,

Hi,


If 192Kbps is enough for your video conference then there is no reason why it shouldn't work.


HTH


Laurent.

sunishnair Wed, 04/29/2009 - 20:23
User Badges:

Hi,


I would like to know that How to configure between PRI and BRI.


Regards,

Sunish


Laurent Aubert Thu, 04/30/2009 - 04:25
User Badges:
  • Cisco Employee,

Hi Sunish,


There is nothing special to consider. Configure your BRI and PRI interface as usual. You need PPP multilink to use all the 6x B-channels


Just don't configure the PRI to add links in the mulitlink bundle because it has more links than than the 3x BRI


Here is the configuration guide for your reference:


http://www.cisco.com/en/US/docs/ios/dial/configuration/guide/dia_cfg_isdn_pri_ps6350_TSD_Products_Configuration_Guide_Chapter.html


And some configuration examples:


http://www.cisco.com/en/US/tech/tk801/tk133/tech_configuration_examples_list.html


HTH


Laurent.

Actions

This Discussion