cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
286
Views
0
Helpful
1
Replies

Access point

cris_jimenez
Level 2
Level 2

Hello How do I add a lightweight access point AIR-LAP1131AG-A-K9 to the network and then have it managed by the LAP4402 controller

thank you

1 Reply 1

You can "prime" the access point by manually/directly configuring items like the AP's IP address and the IP address of the controller, or you can use DNS/DHCP to allow the AP to automagically discover the controller.

Here are a few links worth reading:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml

http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/c52lwap.html

(if you are not running 5.2 code on your controller, just grab the same section from the relevant 4.2/5.1 config guide)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: