04-29-2009 04:21 PM
Folks
I have ace setup as active/standby . What we are noticing is on primary ace we can ping servers but on secondary we can't ping some servers
See below
From Primary ACE:
EWDC-T1ACE12-1/Education# ping 172.28.8.84
Pinging 172.28.8.84 with timeout = 2, count = 5, size = 100 ....
Response from 172.28.8.84 : seq 1 time 0.243 ms
Response from 172.28.8.84 : seq 2 time 0.434 ms
Response from 172.28.8.84 : seq 3 time 0.221 ms
Response from 172.28.8.84 : seq 4 time 0.203 ms
Response from 172.28.8.84 : seq 5 time 0.190 ms
5 packet sent, 5 responses received, 0% packet loss
EWDC-T1ACE12-1/Education# show probe detail ?
| Output modifiers.
> Output Redirection.
<cr> Carriage return.
EWDC-T1ACE12-1/Education# show probe detail |include 172.28.8.84
172.28.8.84 4778369 49 4778320 SUCCESS
172.28.8.84 2867010 8611 2858399 SUCCESS
172.28.8.84 2867010 8611 2858399 SUCCESS
172.28.8.84 2867011 438 2866573 SUCCESS
172.28.8.84 2867011 438 2866573 SUCCESS
EWDC-T1ACE12-1/Education#
From Stanby ACE:
EDMZ-T1ACE12-2/Education# ping 172.28.8.84
Pinging 172.28.8.84 with timeout = 2, count = 5, size = 100 ....
No response received from 172.28.8.84 within last 2 sec
No response received from 172.28.8.84 within last 2 sec
No response received from 172.28.8.84 within last 2 sec
No response received from 172.28.8.84 within last 2 sec
No response received from 172.28.8.84 within last 2 sec
5 packet sent, 0 responses received, 100% packet loss
EDMZ-T1ACE12-2/Education#
EDMZ-T1ACE12-2/Education#
EDMZ-T1ACE12-2/Education# show probe detail |include 172.28.8.84
172.28.8.84 0 0 0 INIT
172.28.8.84 2733 2733 0 FAILED
172.28.8.84 2733 2733 0 FAILED
172.28.8.84 2733 2733 0 FAILED
172.28.8.84 2733 2733 0 FAILED
EDMZ-T1ACE12-2/Education#
I also ran some debug . Look for 172.28.8.84 in the file attached. Any ideas what could be wrong?
04-29-2009 11:15 PM
Hi,
If found this in your trace:
2009 Apr 29 23:00:24.579199 arp/icmp mgr: (ctx:1)ICMP echo request (len 108 id 8193 seq 1) to 172.28.8.84
2009 Apr 29 23:00:24.579233 arp/icmp mgr: (ctx:1)icmp_transmit_pkt: Transmit packet entered length = 100
2009 Apr 29 23:00:24.579282 arp/icmp mgr: (ctx:1)icmp_transmit_pkt: Memsetting data length = 100
2009 Apr 29 23:00:24.579406 arp/icmp mgr: (ctx:1)icmp_transmit_pkt: send_traffic: error -11 from ed_write_pkt: Resource temporarily unavailable
Could you perform a reboot of the standby ACE?
Never saw this problem. What version are you using?
04-30-2009 03:25 AM
I don't want to reboot I want cisco to tell me whats wrong?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide