How to block IP communicator from registering in CME

Unanswered Question
Apr 30th, 2009

Customer wants to block some users PC(IP Communicator)not to register in CME

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Brandon Buffin Thu, 04/30/2009 - 05:57

Disable auto registration and remove the ephone configured with their MAC address.

Brandon

Brandon Buffin Thu, 04/30/2009 - 06:07

The commands are:

router#conf t

router(config)#telephony-service

router(config-telephony)#no auto assign

Hope this helps.

Brandon

Nicholas Matthews Thu, 04/30/2009 - 10:03

Technically the phone will still register. It just won't get a DN. As well, you can specify multiple ranges so you would need to delete the specific range that has been defined.

The command you're looking for is:

telephony-service

no auto-reg-ephone

As said previously, make sure there isn't an ephone with the mac address defined. You'll need to delete that.

hth,

nick

Actions

This Discussion