04-30-2009 06:21 AM - edited 03-14-2019 04:01 AM
I need to replace my primary distributor with a new server. Currently my plan is to shut down the current AW and bring up the new one with the same name, IP address, etc... and install the ICM software.
Has anyone done this? Will it work or is there a better way?
ICM 7.0 SR3
04-30-2009 07:16 AM
04-30-2009 07:47 AM
Are you only running a single Dist?
Doing what you suggest above will work, but you will have a blank HDS, no historic data.
Let us know more about your config and servers.
Cheers
Bully
04-30-2009 10:34 AM
The server I am replacing is not an HDS, just my primary distributor. I also have an AW/HDS.
Sounds like I'm on the right track.
Thanks guys.
04-30-2009 02:45 PM
No problem. Just make sure the SITE name is what you used before - and what is configured in Agent Distribution on the PG.
Install the software. I would keep the service "manual" and install the same SR as production before letting it start up and letting updateaw pull down the config.
Regards,
Geoff
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: