Inside host to DMZ

Unanswered Question
May 1st, 2009
User Badges:

I am unable to allow an inside host access to the DMZ. I have ip any any access lists set up on both interfaces and the following static "static (inside,dmz) [internal_ip_subnet][internal_ip_subnet] 255.255.255.0

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
John Blakley Fri, 05/01/2009 - 08:27
User Badges:
  • Purple, 4500 points or more

Can you post what you have? Normally to allow inside into the dmz, what you have would work, but without seeing your config it may be difficult to tell you what's going on.


HTH,

John

zulqurnain Fri, 05/01/2009 - 08:56
User Badges:
  • Bronze, 100 points or more

It looks to be your static incorrectly configured


example static (inside,dmz)[dmz_IP_subnet][inside_IP_subnet] netmask 255.255.255.255


HTH

PRI

Actions

This Discussion