Inside host to DMZ

networker99 · ‎05-01-2009

I am unable to allow an inside host access to the DMZ. I have ip any any access lists set up on both interfaces and the following static "static (inside,dmz) [internal_ip_subnet][internal_ip_subnet] 255.255.255.0

John Blakley · ‎05-01-2009

Can you post what you have? Normally to allow inside into the dmz, what you have would work, but without seeing your config it may be difficult to tell you what's going on.

HTH,

John

HTH, John *** Please rate all useful posts ***

zulqurnain · ‎05-01-2009

It looks to be your static incorrectly configured

example static (inside,dmz)[dmz_IP_subnet][inside_IP_subnet] netmask 255.255.255.255

HTH

PRI