Cisco 7931 Ip Phone Localization Issue

Unanswered Question
May 2nd, 2009

Hi all,

I'm trying to localize my 7931 phones in order to support Italian language. I have also a 7961 phone which had yet been localized into Italian without any problem, but after many attempts I'm not able to do the same thing with 7931.

During the 7931 bootstrap, I receive the following debug messages (debug tftp events):

#########################################

Router(config-ephone)#

*May 2 09:10:06.610: TFTP: Looking for CTLSEP002497AAEDEE.tlv

*May 2 09:10:06.682: TFTP: Looking for SEP002497AAEDEE.cnf.xml

*May 2 09:10:06.714: TFTP: Opened flash:/its/SEP002497AAEDEE.cnf.xml, fd 10, si

ze 1257 for process 146

*May 2 09:10:06.718: TFTP: Finished flash:/its/SEP002497AAEDEE.cnf.xml, time 00

:00:00 for process 146

Router(config-ephone)#

*May 2 09:10:07.866: TFTP: Looking for Italian_Italy/tc-sccp.jar

*May 2 09:10:07.966: TFTP: Opened flash:/it-tc-sccp.jar, fd 10, size 71423 for

process 146

*May 2 09:10:08.170: TFTP: Finished flash:/it-tc-sccp.jar, time 00:00:00 for pr

ocess 146

Router(config-ephone)#

*May 2 09:10:10.330: %IPPHONE-6-REG_ALARM: 22: Name=SEP002497AAEDEE Load= SCCP3

1.8-2-2SR2S Last=Reset-Reset

*May 2 09:10:11.050: %IPPHONE-6-REGISTER: ephone-1:SEP002497AAEDEE IP:10.1.1.1

*May 2 09:10:11.050: %IPPHONE-6-REGISTER: ephone-1:SEP002497AAEDEE IP:10.1.1.1

#########################################

The thing I can't understand (and probably the cause of this problem)is why 7931 looks for the /it-tc-sccp.jar language file, while it should try to download the /it-gp-sccp.jar file (gp is the code for 7931 phone, tc is for the 7961).

On the Phone Status messages, I receive the following errors:

#########################################

File not found: CTLFile.tlv

No CTL installed

Error updating Locale

#########################################

Please see my attached config

Thank you - Kind Regards

Daniele Visaggio

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Daniele Visaggio Sun, 05/03/2009 - 02:37

My IOS is:

ROM: System Bootstrap, Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1);

Phone Firmware is SCCP31.8-2-2SR2S;

Cisco Unified Communications Manager Express is: Version 4.2(0);

Anyway on the page "Cisco Unified CME 4.2 Supported Firmware, Platforms, Memory, and Voice Products" ( http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme42spc.htm ) I red that the 7931 firware is the correct version supported by 4.2 Call Manager Express.

Thank you for the reply,

Saluti - Daniele Visaggio

Daniele Visaggio Sun, 05/03/2009 - 10:13

Ok, the IOS file name in the router flash is: uc500-advipservicesk9-mz.124-11.XW7

Thank you

Actions

This Discussion