CME 7.0.1: problem converting 7961 SCCP to SIP

Unanswered Question
May 2nd, 2009

Hi All,

i am trying to convert one of the 7961 from SCCP to SIP on CME 7.0.1

1) first i did "no e-phone 2" and "no ephone-dn 2"

2) added "upgrade" and "create profile" command under voice register global (Please see running config below)

*********************

voice service voip

sip

registrar server

voice register global

mode cme

source-address 142.102.66.2 port 5060

max-dn 20

max-pool 10

load 7961 SIP41.8-4-4S

timezone 48

date-format D/M/Y

tftp-path flash:

create profile sync 0252453886191862

!

voice register dn 2

number 7117

!

voice register pool 2

id mac 0024.97AA.486E

type 7961

number 1 dn 2

***********************************

output of sh voice register tftp-bind

***********************************

tftp-server syncinfo.xml url flash:/syncinfo.xml

tftp-server SIPDefault.cnf url flash:/SIPDefault.cnf

tftp-server softkeyDefault_kpml.xml url flash:/softkeyDefault_kpml.xml

tftp-server softkeyDefault.xml url flash:/softkeyDefault.xml

tftp-server SEP002497AA486E.cnf.xml url flash:/SEP002497AA486E.cnf.xml

*****************************

output of debug tftp events

*****************************

May 2 16:25:40.952: TFTP: Looking for SIP41.8-4-4S.loads

SiteC_Router#

*May 2 16:26:05.108: TFTP: Looking for CTLSEP002497AA486E.tlv

*May 2 16:26:05.232: TFTP: Looking for SEP002497AA486E.cnf.xml

*May 2 16:26:05.236: TFTP: Opened flash:/SEP002497AA486E.cnf.xml, fd 7, size 2641 for process 340

*May 2 16:26:05.252: TFTP: Finished flash:/SEP002497AA486E.cnf.xml, time 00:00:00 for process 340

SiteC_Router#

*May 2 16:26:06.904: TFTP: Looking for English_United_States/mk-sccp.jar

*May 2 16:26:07.148: TFTP: Looking for United_States/g3-tones.xml

*****************************

I got following files in flash

apps41.8-4-3-16.sbn

cnu41.8-4-3-16.sbn

cvm41sip.8-4-3-16.sbn

dsp41.8-4-3-16.sbn

jar41sip.8-4-3-16.sbn

SIP41.8-4-4S.loads

softkeyDefault.xml

syncinfo.xml

SEP002497AA486E.cnf.xml

softkeyDefault_kpml.xml

SIPDefault.cnf

Can some please telle why phone is not converting to SIP? i have tried everything and can't figure out what's happening

Thanks

Aamir

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Paolo Bevilacqua Sat, 05/02/2009 - 09:06

Just curious, why do you want to convert to sip? You loose a lot of features in doing that.

panjwani80 Sat, 05/02/2009 - 17:33

because in new CCIE VOICE blueprint BR2 CME site requires atleast one SCCP and one SIP phone :)

Any thoughts?

Paolo Bevilacqua Mon, 05/04/2009 - 14:03

For each FW file, you need to configure tftp-server with the filename and alias as needed.

smahalingam Fri, 08/27/2010 - 20:44

Looks like you don't have the required

files in the flash.

Upload the files and then try again.Good Luck.

Actions

This Discussion