05-04-2009 06:33 AM - edited 03-15-2019 05:48 PM
Hi, dear all!
I am trying to register X-lite on CME, but always get 404 Not found error, here is my config:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
h323
no call service stop
call start slow
call preserve
h245 tunnel disable
h245 passthru all
sip
registrar server
voice register global
mode cme
max-dn 144
max-pool 42
!
voice register dn 1
number 0*0401
allow watch
!
voice register pool 1
id mac 0019.DBD9.5E1A
number 1 dn 1
username 0*0401 password cisco
codec g711ulaw
On X-lite i have set the following:
display name = user name = auth username = 0*0401
password = cisco
register checkbox is marked, and proxy is set to 172.16.120.254.
How to be?..
05-04-2009 09:13 AM
You need to add your source-address under voice register global.
-nick
05-04-2009 09:42 PM
Thanks, nicmatth!
voice register global
mode cme
source-address 172.16.120.254 port 5060
max-dn 144
max-pool 42
!
voice register dn 1
number 0*0401
!
voice register pool 1
id mac 0019.DBD9.5E1A
number 1 dn 1
username 0*0401 password cisco
codec g711ulaw
but still 404 error.
05-05-2009 10:43 AM
what does 'show sip status reg' look like?
05-06-2009 05:51 AM
Solved, but this configuration works only if I replace 0*0401 to 401(for example).
I dont if there is a limitation for asterisk symbol, but on my current IOS it exists.
05-06-2009 07:33 AM
I've recreated this in my lab. I'm investigating.
-nick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide