LWAPP conversion and AP's disappear

Unanswered Question
May 4th, 2009

I have 3 access points that I recently converted to LWAPP. After the conversion, all 3 AP's are now MIA - no sign of them in WCS or on any of our controllers. I can trace them back to the switch that they are directly connected to and they do pull a DHCP address. I found this on the firewall:

May 04 2009 16:39:58: %ASA-7-710005: UDP request discarded from <AP's ip>/26586 to inside:

I am wondering if there is something on the firewall that is blocking the requests from the AP's to join the controller.

Any thoughts?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
bfowles Tue, 05/05/2009 - 06:23

I hope I'm not stating the obvious but if the APs and Controllers are on different sides of a firewall you will need to open ports 12222 & 12223 on the firewall for the LWAPP traffic


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode