My real servers are probing on port 8000 and VIP listening on port 80.
In the configuration I couldnt find any issues but for me its not working. When I try to telnet VIP on port 80 its not connecting.
Is it required the real servers should aware about VIP listening port ?? or can we use any port for VIP ?
the real server does not to know on which port the VIP is listening. You can use any port for the VIP.
Normally your config should look like this:
rserver server1 8000
rserver server2 8000
match virtual-address 10.1.1.1 tcp port eq www