L-2-L and remote access VPN

Unanswered Question
May 5th, 2009

Dear ALL,

I've implemented a test configuration like cisco document ID 82020, but a single Lan-to-Lan and a remote VPN access. Lan-to-Lan behaviour is ok and remote access seems to be running within the first lan, but if I try to ping hosts on withind second lan I can't. Please, anyone could give me a troubleshooting tip?

Regards

Alberto

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mdombek_biz Tue, 05/05/2009 - 10:14

Did you check your NAT statements and for the command same-security-traffic permit INTRA-interface. Most errors occure in those two parts

cheers

michael

mahoran Wed, 06/10/2009 - 17:54

I'm having the same issue. Were you ever able to resolve this?

srue Thu, 06/11/2009 - 05:27

post your config.

make sure nat 0 is configured for all lans that remote access clients need access to. any acl's that might be blocking this traffic should also be checked. is 'sysopt connection permit-vpn' enabled?

Actions

This Discussion