05-05-2009 12:42 AM - edited 03-11-2019 08:27 AM
Dear ALL,
I've implemented a test configuration like cisco document ID 82020, but a single Lan-to-Lan and a remote VPN access. Lan-to-Lan behaviour is ok and remote access seems to be running within the first lan, but if I try to ping hosts on withind second lan I can't. Please, anyone could give me a troubleshooting tip?
Regards
Alberto
05-05-2009 10:14 AM
Did you check your NAT statements and for the command same-security-traffic permit INTRA-interface. Most errors occure in those two parts
cheers
michael
06-10-2009 05:54 PM
I'm having the same issue. Were you ever able to resolve this?
06-11-2009 05:27 AM
post your config.
make sure nat 0 is configured for all lans that remote access clients need access to. any acl's that might be blocking this traffic should also be checked. is 'sysopt connection permit-vpn' enabled?
06-11-2009 07:41 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide