05-05-2009 08:37 AM - edited 03-15-2019 05:51 PM
I'm working on a qos setup for a customer using a non cisco ip pbx, and I'm told it uses either g711 or g729 codecs depending on available licencies.
So I could get either a 64k or 8k call, which requires different qos policies.
Nbar seems to be the way to classify the traffic, based on RTP PT value, but G711 doesnt appear to have an assigned value.
Currently I'm thinking of configuring my classifier to match a PT value of 18 for G729, and assuming if its not G729 then it must be G711, but that seems a bit crude. Anyone any other ideas on how to do this?
Andy
Solved! Go to Solution.
05-05-2009 11:10 AM
05-05-2009 11:10 AM
G.711 payload type should be 0 for G711ulaw and 8 for G.711alaw
-nick
05-05-2009 12:24 PM
Thanks for that, now I understand what PCMU and PCMA mean in the assignments list at iana.org.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: