I'm injecting ospf routes into eigrp. The route on the other side shows:
D EX 184.108.40.206 [170/1662976] via 192.168.1.1, 00:00:35, FastEthernet0/0
I want to change the AD from 170 to something else. On the other router, I'm running eigrp and it's redistributing. On the router above, I only have eigrp. I can change the AD in an actual eigrp network:
router eigrp 100
network 220.127.116.11 0.0.0.0
distance 89 192.168.1.1 0.0.0.0 15
access-list 15 permit host 18.104.22.168
If I add 22.214.171.124 to the acl above, it doesn't get changed, but stays at 170. The 126.96.36.199 is a route that's advertised from ospf into eigrp on the other router. Is there a way that I can change this AD? I'm showing hits on the acl, so I know it's getting there.