Dial plan and translation profile for sweden

Answered Question
May 5th, 2009
User Badges:
  • Silver, 250 points or more

Hi,


I´m wondering if it´s possible to get the dial-peer and translation profile for sweden in a text file? We have a customer with a 2811 CME router in sweden and I´m not familiar with the swedish dial-plan. The dial-peer should be for a SIP trunk, any help on this issue is most welcome :)


regards

Eivind Jonassen

Correct Answer by Marcos Hernandez about 8 years 3 weeks ago

Dialplan is one of those things where you really want to get specific. Easy means you have to rely on interdigit timeout, which is not acceptable for some customers, as it takes too long for the call to be placed. There are patterns where you won't be able to avoid this, but whenever you can, go with more dial peers.


Thanks,


Marcos

Correct Answer by Marcos Hernandez about 8 years 3 weeks ago

Eivind,


Please see the picture below for the Sweidish dialplan that we will be adding to CCA soon. You can build the dial-peer from it. Please check with the local provider to be sure about its applicability.


Sweden_dp.png


Marcos

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Marcos Hernandez Tue, 05/05/2009 - 10:45
User Badges:
  • Blue, 1500 points or more

Eivind,


Please see the picture below for the Sweidish dialplan that we will be adding to CCA soon. You can build the dial-peer from it. Please check with the local provider to be sure about its applicability.


Sweden_dp.png


Marcos

Eivind Jonassen Tue, 05/05/2009 - 11:12
User Badges:
  • Silver, 250 points or more

Marcos,


Just a quick input, for police it´s posted 114, but says at the end that it´s a 5 digit number as for medical as well with a 4 digit number.


The dialplan then should look something like


dial-peer voice X voip

translation-profile outgoing PSTN_Outgoing

destination-pattern 0114..


dial-peer voice X voip

translation-profile outgoing PSTN_Outgoing

destination-pattern 114..


And do the same for the other emergency numbers? That would be correct? and then for the rest I could maybe do:


dial-peer voice X voip

translation-profile outgoing PSTN_Outgoing

destination-pattern 0[0-9]T


Just to keep it simple and match everything...


Regards

Eivind


Correct Answer
Marcos Hernandez Tue, 05/05/2009 - 11:18
User Badges:
  • Blue, 1500 points or more

Dialplan is one of those things where you really want to get specific. Easy means you have to rely on interdigit timeout, which is not acceptable for some customers, as it takes too long for the call to be placed. There are patterns where you won't be able to avoid this, but whenever you can, go with more dial peers.


Thanks,


Marcos

Eivind Jonassen Tue, 05/05/2009 - 14:01
User Badges:
  • Silver, 250 points or more

Thanks Marcos,


I will make the dial-peer more specific as you recommended :)


regards

Eivind

Actions

This Discussion

Related Content