Quick Route Map Question

Unanswered Question
May 5th, 2009
User Badges:
  • Blue, 1500 points or more

How come my static route is getting redistributed properly, yet the route map and access-list dont show any hits?


switch2#sh run | be router eigrp

router eigrp 10

redistribute static route-map STATIC

network 1.1.1.1 0.0.0.0

!

switch2#sh route-map

route-map STATIC, permit, sequence 10

Match clauses:

ip address (access-lists): 10

Set clauses:

metric 10000 1 255 1 1500

Policy routing matches: 0 packets, 0 bytes

switch2#

switch2#

switch2#

switch2#sh access-lists 10

Standard IP access list 10

10 permit 100.100.100.100

switch2#


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
John Blakley Tue, 05/05/2009 - 13:37
User Badges:
  • Purple, 4500 points or more

Victor,


I set a couple of routers up exactly like you have yours, and I see hits on the acl but not on the route map. Could it be inherent to the switch or IOS?


HTH,

John

lamav Tue, 05/05/2009 - 13:41
User Badges:
  • Blue, 1500 points or more

I dont know..I bet if I searched the Internet high and low, I would find the answer....just dont have the patience for it now...

Actions

This Discussion