05-05-2009 02:09 PM - edited 03-10-2019 04:28 PM
Hi All,
I have this config:
aaa authentication login default local line enable
aaa authorization console
aaa authorization exec default local
aaa authorization network default local
line vty 0 4
password Gr834!
transport preferred ssh
transport input ssh
transport output ssh
then create username "admin" with privilege 15. But I can't login to SSH with this username and password? I've already generated public key on the router.
any idea would be very appreciated.
thanks
Alex
Solved! Go to Solution.
05-06-2009 01:11 AM
try this:
username cisco password cisco
enable secret cisco
ip domain-name nsp.org
crypto key genrete rsa 1024
ip ssh version 2
line vty 0 4
transport input all
exit
05-06-2009 01:11 AM
try this:
username cisco password cisco
enable secret cisco
ip domain-name nsp.org
crypto key genrete rsa 1024
ip ssh version 2
line vty 0 4
transport input all
exit
05-06-2009 05:24 PM
crypto key generate rsa 1024
05-06-2009 11:29 PM
SSH normally works with minimum 1024.
05-07-2009 09:11 AM
Here is a complete ssh config that doesn't need a hostname or domain name:
crypto key gen rsa gen label SSH_Keys mod 1024
ip ssh ver 2
ip ssh authentication-retries 3
ip ssh time-out 90
ip ssh source-interface loopback0
username test secret p@ssw0rd
enable secret s3cr3tPassw0rd!
aaa new-model
aaa authentication login default local
aaa authentication enable default enable
line vty 0 4
transport input ssh
I would recommend AGAINST creating level 15 usernames.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: