05-05-2009 07:05 PM
Hi Cisco Experts,
Based on my attachement, I need your advise on how to route packets from Frame Relay users to Leased Line users with different Gateway. If I will be using the 192.168.0.102 gateway, I can access the 192.168.4.0 network but not the 192.168.2.0 network. But if I use the 192.168.0.41 gateway, I can access the 192.168.2.0 network but not 192.168.4.0 network. What will be the solution for this problem. Is it routing only or need to add another NIC for the other gateway. Hope you could help me regarding this matter.
Regards,
Raymond
Solved! Go to Solution.
05-06-2009 01:24 AM
Raymond,
The solution is simple:-
"ip route 192.168.2.0 255.255.255.0 192.168.0.41" on the GW 192.168.0.102
"ip route 192.168.4.0 255.255.255.0 192.168.0.102" on the GW 192.168.0.41
HTH>
05-06-2009 01:24 AM
Raymond,
The solution is simple:-
"ip route 192.168.2.0 255.255.255.0 192.168.0.41" on the GW 192.168.0.102
"ip route 192.168.4.0 255.255.255.0 192.168.0.102" on the GW 192.168.0.41
HTH>
05-06-2009 04:53 PM
Hi Sir Andrew,
Thanks for your reply and the configuration works!!! I really appreciate the help. Thanks again...
Best regards,
Raymond
05-07-2009 01:33 AM
np - glad to help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide